K-Tuned K24Z Series Upper Coolant Housing Straight Inlet

Introducing the K-Tuned Upper Coolant Housing designed specifically for K24Z Series engines. This housing offers several unique benefits over the stock units. The hose outlet on the K-Tuned housing can pivot slightly, allowing for about 15 degrees of angle adjustment. This is a big advantage compared to the fixed factory outlet that often places the upper rad hose in the way of the intake piping. There are three hose outlet options to fit any radiator hose setup. You can choose the standard 1.25' rad hose outlet for regular rubber or silicone rad hoses, or switch to our optional 16AN fittings for upgraded hose and fittings available from K-Tuned. We've also designed an optional Filler Neck that can move the radiator cap to a higher point on the engine. This new location is the highest point of the cooling system, making it easy for air pockets to escape during the coolant bleeding process. The optional Filler Neck comes in standard 1.25' hose or 16AN sizes and is designed to work with an OEM 92 - 00 Honda Civic radiator cap. This part is especially useful for engines that have a hard time with coolant bleeding. The K-Tuned Upper Coolant Housing pairs well with our Swivel Neck Thermostat and Water Pump Block off Plate, providing plenty of options for custom and race engine cooling setups. Applications: K24Z Series Engines. Features: a -16OR (O-Ring) Outlet and a -12OR (O-Ring) Filler Inlet, greater clearance for sidewinder turbo manifolds. Notes: Excludes K24A1 and K24Y Series. Does not come with radiator; it's an optional item.

Using the K-Tuned Upper Coolant Housing is straightforward. First, make sure your engine is a K24Z Series engine as it won't work with K24A1 and K24Y Series. Choose the appropriate hose outlet for your radiator hose setup. If you have regular rubber or silicone rad hoses, go for the standard 1.25' rad hose outlet. For upgraded hoses, use the optional 16AN fittings. When installing the optional Filler Neck, place it so that the radiator cap is at the highest point of the cooling system. This will help air pockets escape easily during the coolant bleeding process. Remember, this part is designed to work with an OEM 92 - 00 Honda Civic radiator cap. The housing is meant to be used with our Swivel Neck Thermostat and Water Pump Block off Plate for the best custom and race engine cooling setups. This product doesn't come with a radiator, so you'll need to purchase it separately if you need one. As for maintenance, regularly check the hose connections for any signs of leaks or wear. If you notice any issues, replace the hoses or fittings as needed. Keep the housing clean to ensure optimal performance.